Eight amplified channels (8 x 65w into 4ohms) and six further pre-outs mean this 8-channel can be configured to offer the benefits of built-in DSP to a much larger system. With complete bridging available, the flexibility of this mini-beast is astonishing!
New generation software for adjusting parameters of the DSP plus built-in audio analysis (acoustic RTA) means the entire set-up can take place without the need for external equipment. This makes the installer's job easier.
POWER SUPPLY
Nominal power supply voltage / fuse:
11 - 15 VDC / 2 x 30A
Pulse operating voltage:
6.5 - 17.5 VDC
Idling current: 1.5 A
Standby current draw: 1.7 mA
Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): 55 A
Remote IN: 4 -15 VDC (1 mA)
Remote OUT: 6.5 -15 VDC (150 mA)
ART – Automatic Remote Turn on/off from Speaker-In
1.5 VDC
Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: 82%
AMPLIFIER STAGE
Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: 0.05%
Damping factor @ 1 kHz , 4Ω, 2 VRMS: 100
Bandwidth @ -3 dB: 10 Hz - 42 kHz
S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input:
98.5 dBA
S/N ratio (A weighted @ Rated Power) Optical Input:
105 dBA
Minimum load impedance:
8Ch: 2Ω
4Ch – (Bridge 1/2; 3/4; 5/6; 7/8): 4Ω
Output Continuous Power (RMS) @14.4 VDC, 1% THD:
• 8 Ch @ 4Ω: 65 W x 8
• 8 Ch @ 2Ω: 100 W x 8
• 4Ch (Bridge 1/2; 3/4; 5/6; 7/8) @ 4Ω: 200 W x 4
CEA SPECIFICATIONS
Output power @ 4Ω, 1% THD+N, 14.4 V: 65 W x 8
SN ratio (ref. 1 W output): 80 dB
INPUTS / OUTPUTS
Pre-In (8 Ch): 0.6 - 6 VRMS (15 kΩ Imp.)
Speaker-In (8 Ch + + additional 4 Ch with optional F4IN card):
2.2 - 22 VRMS (5 Ω Imp.)
Digital IN:
1 x Optical S/PDIF; Max 192 kHz / 24 bit + 1 x Optical/Coaxial S/PDIF with optional F2O card
DSP Preout (6 Ch): 5V RMS
DIGITAL SIGNAL PROCESSOR
Audio DSP and converters:
Analog Devices ADAU1467 automotive qualified audio processor.
Processing @ 96 kHz.Analog Devices 3 x ADAU1978 (4ch) and ADAU1966A (16ch) A/D and D/A converters (24 bit/192 kHz) providing very high level performance
Filter type:
Full / High-Pass / Low-Pass / Band-Pass
Filter mode and slope:
Linkwitz-Riley @ 12/24/36/48 dB/Oct.
Butterworth @ 6/12/18/24/30/36/42/48 dB/Oct.
Bessel @ 6/12/18/24/30/36/42/48 dB/Oct.
Chebyshev @ 6/12/18/24/30/36/42/48 dB/Oct.
QLP @ 6 dB/Oct.
Crossover frequency: 20 Hz - 20 kHz
Phase control: 0° / 180°, All-Pass filters
Analog Input Equalizer (20 Hz ÷ 20 kHz):
12 Biquad + Delay
Output Equalizer:
Parametric/Graphic Biquad: 15 poles, 20 Hz - 20 kHz
Input and Output Real-Time Audio Monitor: RTA
Time Alignment Distance: 0 - 510 cm / 0 - 200.8 inches
Time Alignment Delay: 0 - 15 ms
CONTROL CONNECTIONS
Audison DRCC port:
Input for DRCC remote control (Optional)
Audison ADC port:
Manage other Audison devices that support this standard
Control 1 wire:
Customisable functions (+ 12 V activated)
Control 2 wire:
Customisable functions (+ 12 V activated)
GENERAL REQUIREMENTS
PC connections:
Micro USB 1.1 / 2.0 / 3.0 Compatible
Software/ PC requirements:
Windows 10, Windows 11 (min. res. 1024 x 768
Ambient operating temperature range:
0 °C to 55 °C (32 °F to 131 °F)
SIZE / WEIGHT
Max size W x H x D (mm/inch):
240 x 47 x 156 / 9.44 x 1.85 x 6.14
Weight (kg/lb): 2.04 / 4.49